Cisco ONS 15454 Series Procedure Manual page 776

DLP-A507 View OC-N PM Parameters
Figure 22-1
Card View
Performance
Directions
radio buttons
Intervals
radio buttons
Step 3 In the Port drop-down list, click the port you want to monitor.
Step 4 Click Refresh.
View the PM parameter names that appear in the Param column. The PM parameter values appear in the
Step 5
Curr (current), and Prev-n (previous) columns. For PM parameter definitions, refer to the "Performance
Monitoring" chapter in the Cisco ONS 15454 Troubleshooting Guide.
Step 6 To monitor another port on a multiport card, choose another port from the Port drop-down list and click
Refresh.
Step 7 Return to your originating procedure (NTP).
Cisco ONS 15454 Procedure Guide, R5.0
22-2
Viewing OC-N Card Performance Monitoring Information
tab
Signal-type
port drop-
down list
Sub-signal Refresh Auto-refresh
STS drop- button drop-down list
down list
Chapter 22 DLPs A500 to A599
Baseline Clear Help
button button button
October 2005