Ntp- A315 Modify Port Settings And Pm Parameter Thresholds For Fc_Mr-4 Cards - Cisco ONS 15454 Series Procedure Manual

Chapter 11 Change Card Settings
Perform any of the following tasks as needed:
Step 3
•
•
•
Complete the
Step 4
Stop. You have completed this procedure.
NTP-A315 Modify Port Settings and PM Parameter Thresholds
for FC_MR-4 Cards
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
OC-N card settings. If you are already logged in, continue with Step 2.
Step 2 Complete the
Perform any of the following tasks as needed:
Step 3
•
•
•
•
•
Step 4 Complete the
Stop. You have completed this procedure.
December 2004
DLP-A176 Convert DS1-14 Cards From 1:1 to 1:N Protection, page 18-56
DLP-A177 Convert DS3-12 Cards From 1:1 to 1:N Protection, page 18-57
DLP-A178 Convert DS3-12E Cards From 1:1 to 1:N Protection, page 18-59
"NTP-A108 Back Up the Database" procedure on page
This procedure changes the line and threshold settings for storage area
network (SAN) cards, including the FC_MR-4.
None
NTP-A274 Install the FC_MR-4 Cards, page 2-11
As needed
Onsite or remote
Provisioning or higher
"DLP-A60 Log into CTC" task on page 17-66
"NTP-A108 Back Up the Database" procedure on page
DLP-A438 Change General Port Settings for the FC_MR-4 Card, page 21-16
DLP-A439 Change Distance Extension Port Settings for the FC_MR-4 Card, page 21-18
DLP-A440 Change Enhanced FC/FICON Port Settings for the FC_MR-4 Card, page 21-19
DLP-A357 Create FC_MR-4 RMON Alarm Thresholds, page 20-41
DLP-A358 Delete FC_MR-4 RMON Alarm Thresholds, page 20-45
"NTP-A108 Back Up the Database" procedure on page
NTP-A315 Modify Port Settings and PM Parameter Thresholds for FC_MR-4 Cards
at the node where you want to change the
Cisco ONS 15454 Procedure Guide, R5.0
15-4.
15-4.
15-4.
11-5