Figure 18-7 Ubic-V Alignment Pins - Cisco ONS 15454 Series Procedure Manual

Chapter 18 DLPs A100 to A199
Figure 18-7 UBIC-V Alignment Pins
Do not force the UBIC-V EIA onto the shelf if you feel strong resistance.
Caution
Locate the three jack screws on the UBIC-V
Step 7
thumb screw a few turns and move to the next one, turning each thumb screw a few turns at a time until
all three screws are hand tight
Tightening the jack screws unevenly could cause damage to the UBIC-V connectors.
Caution
March 2007
UBIC alignment pins
(Figure
(Figure 18-9).
DLP-A190 Install a UBIC-V EIA
18-8). Starting with any jack screw, tighten the
Cisco ONS 15454 Procedure Guide, R5.0
18-63