Dlp- A335 Delete Vlans - Cisco ONS 15454 Series Procedure Manual

Chapter 20 DLPs A300 to A399
Click the Provisioning > Overhead Circuits tabs.
Step 2
Click the overhead circuit that you want to delete: local or express orderwire, user data channel,
Step 3
IP-encapsulated tunnel, or DCC tunnel.
Click Delete.
Step 4
In the confirmation dialog box, click Yes to continue.
Step 5
Return to your originating procedure (NTP).
Step 6
DLP-A335 Delete VLANs
Purpose
Tools/Equipment
Prerequisite Procedures See
Required/As Needed
Onsite/Remote
Security Level
From the View menu, choose Go to Network View.
Step 1
From the Tools menu, choose Manage VLANS.
Step 2
In the All VLANs dialog box, click the VLAN that you want to remove.
Step 3
Click Delete.
Step 4
Step 5 In the confirmation dialog box, click Yes.
Return to your originating procedure (NTP).
Step 6
DLP-A336 Repair an IP Tunnel
Purpose
Tools/Equipment
Prerequisite Procedures See
Required/As Needed
Onsite/Remote
Security Level
Obtain the original IP address of the node in question.
Step 1
Step 2 From the View menu, choose Go to Network View.
March 2005
This task removes VLANs from a domain.
None
Chapter 6, "Create Circuits and VT Tunnels"
procedures.
As needed
Onsite or remote
Provisioning or higher
This task repairs circuits that have an OOS-PARTIAL status as a result of
node IP address changes.
None
Chapter 6, "Create Circuits and VT Tunnels"
procedures.
As needed
Onsite or remote
Provisioning or higher
DLP-A335 Delete VLANs
for circuit creation
for circuit creation
Cisco ONS 15454 Procedure Guide, R5.0
20-23