Chapter 20
DLPs A300 to A399
Figure 20-10
Return to your originating procedure (NTP).
Step 6
DLP-A371 Remove Pass-through Connections
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Log into the deleted node, using the
Step 1
•
•
Step 2
Click the Circuits tab. All internode circuits are shown as PARTIAL.
Step 3
Refer to the diagram or CTC print out you created in the
on page 14-6
circuits on the line cards of the removed node.
Click the Filter button.
Step 4
March 2005
Manually Routing a BLSR-DRI Circuit Route
This task removes pass-through connections from a node deleted from a
ring.
None
As needed
Onsite or remote
Provisioning or higher
In the CTC Login dialog box, check the Disable Network Discovery check box.
Choose None from the Additional Nodes drop-down list.
or the
"NTP-A294 Remove a Path Protection Node" procedure on page
"DLP-A60 Log into CTC" task on page
"NTP-A240 Remove a BLSR Node" procedure
Cisco ONS 15454 Procedure Guide, R5.0
DLP-A371 Remove Pass-through Connections
17-66.
14-11. Find the
20-55