Dlp- A45 Install The Fiber Boot - Cisco ONS 15454 Series Procedure Manual

Hide thumbs Also See for ONS 15454 Series:

Table of Contents

DLP-A45 Install the Fiber Boot

Figure 17-24

Return to your originating procedure (NTP).

DLP-A45 Install the Fiber Boot

Tools/Equipment

Prerequisite Procedures

Required/As Needed

Onsite/Remote

Security Level

You can install the fiber boots on the fiber-optic cables before or after the fibers are attached to the OC-N

Cisco ONS 15454 Procedure Guide, R5.0

Connecting Fiber to a Four-Node, Four-Fiber BLSR

This task installs the fiber boot, which protects the fiber from excessive

bending. Required for all OC-N cards except the OC-192 and the

NTP-A16 Install the OC-N Cards, page 2-6

DLPs A1 to A99

Working fibers

Protect fibers

Chapters

Table of Contents