Figure 5-10 Integrated Blsr To Path Protection Dri Example - Cisco ONS 15454 Series Procedure Manual

Chapter 5 Turn Up Network
Figure 5-10 Integrated BLSR to Path Protection DRI Example
Tx
Rx
West
Slot 5
Node 1
Tx
Rx
West
Slot 1 Slot 2
Node 4
Tx
Rx
Slot 5
Node 1
Stop. You have completed this procedure.
NTP-A224 Provision an Open-Ended Path Protection
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
December 2004
Tx
Rx
East
Slot 12
BLSR Ring
East
Slot 5 Slot 12
Ring
Tx
Rx
Slot 12
This procedure provisions ONS 15454s in an open-ended path protection
connected to a third-party vendor network. This topology allows you to
route a circuit from one ONS 15454 network to another ONS 15454
network through the third-party network.
None
NTP-A35 Verify Node Turn-Up, page 5-2
As needed
Onsite
Provisioning and higher
NTP-A224 Provision an Open-Ended Path Protection
Tx
Rx
West
Slot 5
Node 2
Tx
Rx
West
Slot 1 Slot 2
Node 3
Tx
Rx
Slot 5
Node 2
Cisco ONS 15454 Procedure Guide, R5.0
Tx
Rx
East
Slot 12
East
Slot 5 Slot 12
Tx
Rx
Slot 12
5-31