Cisco ONS 15454 Series Procedure Manual page 723
Hide thumbs
Also See for ONS 15454 Series:
- Reference manual (728 pages) ,
- Troubleshooting manual (558 pages) ,
- Software feature and configuration manual (232 pages)
Table of Contents
Advertisement
Chapter 20
DLPs A300 to A399
Table 20-6
Parameter
FC
CSS
ESA
ESB
SEFS
ESNE
ESFE
SESNE
SESFE
UASNE
UASFE
Table 20-7
March 2005
Electrical Path Threshold Options for the DS3XM-12 Card (continued)
Description
Failure count
Controlled slip seconds
Errored seconds (Type A)
Errored seconds (Type B)
Severely errored frame
seconds
Errored seconds (Near End)
Errored seconds (Far End)
Severely errored seconds
(Near End)
Severely errored seconds
(Far End)
Unavailable seconds
(Near End)
Unavailable seconds
(Far End)
describes the values on the Provisioning > SONET Thresholds tabs for the DS3XM-12 cards.
DLP-A387 Change Line and Threshold Settings for the DS3XM-12 Card
Options
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(DS3, Pbit Near End only).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(Far End, DS1).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(Far End, DS1).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(Far End, DS1).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(Far End, DS1).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(Far End, DS1).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(Far End, DS1).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(Far End, DS1).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(Far End, DS1).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(Far End, DS1).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click Show Thresholds
(Far End, DS1).
Cisco ONS 15454 Procedure Guide, R5.0
20-79
Advertisement
Chapters
Table of Contents
