Figure 5-5 Integrated Two-Fiber Blsr Dri Example - Cisco ONS 15454 Series Procedure Manual

NTP-A44 Provision Path Protection Nodes
Figure 5-5 Integrated Two-Fiber BLSR DRI Example
Tx
Rx
West
Slot 5
Node 1
Tx Tx Tx
Rx Rx Rx
Slot 1 Slot 2 Slot 5
West West
Node 3
Tx
Rx
West
Slot 5
Node 5
Stop. You have completed this procedure.
NTP-A44 Provision Path Protection Nodes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Path protection is the default ONS 15454 topology. It is available as soon as you install the path
Note
protection OC-N cards, connect the OC-N fibers, and create the DCC terminations. Unlike the BLSRs,
ONS 15454 path protection configurations do not require explicit setup.
Cisco ONS 15454 Procedure Guide, R5.0
5-20
Tx
Rx
East
Slot 12
Tx
Rx
Slot 12
East East
Tx
Rx
East
Slot 12
This procedure provisions nodes for inclusion in a path protection.
None
NTP-A35 Verify Node Turn-Up, page 5-2
As needed
Onsite
Provisioning and higher
Tx
Rx
West
Slot 5
Node 2
Tx Tx
Rx Rx
Slot 1 Slot 2
West West
Node 4
Tx
Rx
West
Slot 5
Node 6
Chapter 5
Tx
Rx
East
Slot 12
Tx Tx
Rx Rx
Slot 5 Slot 12
East East
Tx
Rx
East
Slot 12
Turn Up Network
December 2004