Ntp- A163 Restore The Node To Factory Configuration - Cisco ONS 15454 Series Procedure Manual

NTP-A163 Restore the Node to Factory Configuration
Figure 15-3
Wait for the file to complete the transfer to the TCC2/TCC2P card.
Step 10
Click OK when the "Lost connection to node, changing to Network View" dialog box appears. Wait for
Step 11
the node to reconnect.
If you cleared a switch in
Step 12
Stop. You have completed this procedure.
NTP-A163 Restore the Node to Factory Configuration
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco strongly recommends that you keep different node databases in separate folders. This is because
Caution
the reinit tool chooses the first product-specific software package in the specified directory if you use
the Search Path field instead of the Package and Database fields. You might accidentally copy an
incorrect database if multiple databases are kept in the specified directory.
Restoring a node to the factory configuration deletes all cross-connects on the node.
Caution
Cisco ONS 15454 Procedure Guide, R5.0
15-8
Restoring the Database—In-Process Notification
Step 3, reapply the switch as needed.
This procedure reinitializes the ONS 15454 using the CTC
reinitialization tool. Reinitialization uploads a new software package to
the TCC2/TCC2P cards, clears the node database, and restores the
factory default parameters.
ONS 15454 SONET System Software CD, Version 5.0.x
JRE 1.4.2 must be installed on the computer to log into the node when
the reinitialization is complete. The reinitialization tool can run on
JRE 1.3.1_02 or JRE 1.4.2.
NTP-A108 Back Up the Database, page 15-4
NTP-A260 Set Up Computer for CTC, page 3-1
One of the following:
NTP-A234 Set Up CTC Computer for Local Craft Connection to the
•
ONS 15454, page
NTP-A235 Set Up a CTC Computer for a Corporate LAN
•
Connection to the ONS 15454, page 3-4
As needed
Onsite
Superuser
Chapter 15
3-2, or
Maintain the Node
December 2004