Figure 18-3 Node View Alarm Behavior Window - Cisco ONS 15454 Series Procedure Manual

DLP-A117 Apply Alarm Profiles to Cards and Nodes
Figure 18-3
To apply profiles to a card:
Step 2
Click a selection from the Profile column for the card.
a.
Choose the new profile from the drop-down list.
b.
Click Apply.
c.
To apply the profile to an entire node:
Step 3
Click the Node Profile drop-down arrow at the bottom of the window
a.
Choose the new alarm profile from the drop-down list.
b.
Click Apply.
c.
To reapply a previous alarm profile after you have applied a new one, select the previous profile and click
Step 4
Apply again.
Return to your originating procedure (NTP).
Step 5
Cisco ONS 15454 Procedure Guide, R5.0
18-6
Node View Alarm Behavior Window
Chapter 18 DLPs A100 to A199
(Figure 18-3).
March 2007