Installing The Minibnc Eia - Cisco ONS 15454 Series Procedure Manual

Chapter 20 DLPs A300 to A399
Use a Phillips screwdriver to install the six perimeter screws and bracket screws (P/N 48-0422-01) at
Step 6
8 to 10 lbf-inch (9.2 to 11.5 kgf-cm) to secure the cover panel to the backplane
page 20-58). Install the alarm and timing panel cover and then insert and tighten the last perimeter screw.
Figure 20-13
Figure 20-13
Return to your originating procedure (NTP).
Step 7
March 2005
shows a MiniBNC EIA installation.

Installing the MiniBNC EIA

DLP-A373 Install a MiniBNC EIA
(Figure 20-11 on
Cisco ONS 15454 Procedure Guide, R5.0
20-59