Dlp- A245 Use The Reinitialization Tool To Clear The Database And Upload Software (Unix) - Cisco ONS 15454 Series Procedure Manual

Chapter 19 DLPs A200 to A299
Complete the
Step 9
and
Return to your originating procedure (NTP).
Step 10
DLP-A245 Use the Reinitialization Tool to Clear the Database and Upload
Software (UNIX)
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Restoring a node to the factory configuration deletes all cross-connects on the node.
Caution
Insert the system software CD containing the reinit tool, software, and defaults database into the
Step 1
computer CD-ROM drive. If the CTC Installation Wizard appears, click Cancel.
To find the recovery tool file, go to the CISCO15454 directory on the CD (usually
Step 2
/cdrom/cdrom0/CISCO15454).
If you are using a file explorer, double-click the RE-INIT.jar file. If you are working with a command
Step 3
line, run java -jar RE-INIT.jar. The NE Re-Initialization window appears
Complete the following fields:
Step 4
•
•
•
September 2005
DLP-A245 Use the Reinitialization Tool to Clear the Database and Upload Software (UNIX)
"NTP-A25 Set Up Name, Date, Time, and Contact Information" procedure on page 4-4
"NTP-A169 Set Up CTC Network Access" procedure on page
This task reinitializes the ONS 15454 using the CTC reinitialization tool
on a UNIX computer. Reinitialization uploads a new software package
to the TCC2/TCC2P cards, clears the node database, and restores the
factory default parameters.
ONS 15454 SONET System Software CD, Version 5.0.x
JRE 1.4.2 must be installed on the computer to log into the node at the
completion of the reinitialization. The reinitialization tool can run on
JRE 1.3.1_02 or JRE 1.4.2.
NTP-A108 Back Up the Database, page 15-4
NTP-A260 Set Up Computer for CTC, page 3-1
One of the following:
As needed to clear the existing database from a TCC2/TCC2P card and
restore the node default settings.
Onsite or remote
Superuser
GNE IP—If the node you are reinitializing is accessed through another node configured as a GNE,
enter the GNE IP address. If you have a direct connection to the node, leave this field blank.
Node IP—Enter the node name or IP address of the node that you are reinitializing.
User ID—Enter the user ID needed to access the node.
NTP-A234 Set Up CTC Computer for Local Craft Connection to the
•
ONS 15454, page 3-2, or
NTP-A235 Set Up a CTC Computer for a Corporate LAN
•
Connection to the ONS 15454, page 3-4
4-7.
(Figure 19-3).
Cisco ONS 15454 Procedure Guide, R5.0
19-27