Figure 17-1 Reversing The Mounting Brackets (23-Inch [584.2-Mm] Position To 19-Inch [482.6-Mm] Position) - Cisco ONS 15454 Series Procedure Manual

Chapter 17 DLPs A1 to A99
Remove the screws that attach the mounting bracket to the side of the shelf assembly.
Step 1
Flip the detached mounting bracket upside down.
Step 2
Text imprinted on the mounting bracket will now also be upside down.
Step 3 Place the widest side of the mounting bracket flush against the shelf assembly (see
The narrow side of the mounting bracket should be towards the front of the shelf assembly. Text
imprinted on the mounting bracket should be visible and upside down.
Step 4 Align the mounting bracket screw holes against the shelf assembly screw holes.
Insert the screws that were removed in
Step 5
Repeat the task for the mounting bracket on the opposite side.
Step 6
Figure 17-1 Reversing the Mounting Brackets (23-inch [584.2-mm] Position to 19-inch [482.6-mm] Position)
Front
Top of unit
Rear
19 in. (482.6 mm) position
Front
Top of unit
Rear
23 in. (584.2 mm) position
Return to your originating procedure (NTP).
Step 7
March 2005
DLP-A3 Reverse the Mounting Bracket to Fit a 19-inch (482.6 mm) Rack
Step 1 and tighten them.
Rear
Mounting
L brackets
Mounting
L brackets
Figure
Side of unit
23 in. (584.2 mm)
mounting holes
19 in. (482.6 mm)
mounting holes
Cisco ONS 15454 Procedure Guide, R5.0
17-1).
Front
17-3