Table 11-1 Cisco Ons 15454 Card State Transitions; Ntp- A297 Change Card Service State - Cisco ONS 15454 Series Procedure Manual

NTP-A297 Change Card Service State
NTP-A297 Change Card Service State
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
card service state.
Click the Inventory tab.
Step 2
Click Admin State for the card you want to change, and choose an Admin state from the drop-down list:
Step 3
IS (In-Service) or OOS,MT (Out-of-Service,Maintenance).
Click Apply.
Step 4
If an error message opens indicating that the card state cannot be changed from its current state, click
Step 5
OK.
Table 11-1
information about the enhanced state model and card state transitions, refer to the "Administrative and
Service States" appendix of the Cisco ONS 15454 Reference Manual.
Table 11-1
Admin State
IS
IS
IS
OOS,MT
OOS,MT
Cisco ONS 15454 Procedure Guide, R5.0
11-6
This procedure changes card service state.
None
Chapter 2, "Install Cards and Fiber-Optic Cable"
As needed
Onsite or remote
Provisioning or higher
"DLP-A60 Log into CTC" task on page 17-66
lists possible card service state transitions based on the Admin State chosen. For more
Cisco ONS 15454 Card State Transitions
Original Service State
OOS-AUMA,MT & UEQ
(Out-of-Service and Autonomous
Management,Maintenance and
Unequipped)
OOS-AUMA,MEA & MT
(Out-of-Service and Autonomous
Management,Mismatched Equipment and
Maintenance)
OOS-MA,MT
(Out-of-Service and
Management,Maintenance)
OOS-AU,MEA
(Out-of-Service and
Autonomous,Mismatched Equipment)
OOS-AU,AINS & UEQ
(Out-of-Service and Autonomous,Auto
In-Service and Unequipped)
Chapter 11 Change Card Settings
at the node where you want to change the
Next Service State
OOS-AU,UEQ
(Out-of-Service &
Autonomous,Unequipped)
OOS-AU,MEA
(Out-of-Service and
Autonomous,Mismatched Equipment)
IS-NR
(In-Service and Normal)
OOS-AUMA,MT & UEQ
(Out-of-Service and Autonomous
Management,Maintenance and
Unequipped)
OOS-AUMA,MT & UEQ
(Out-of-Service and Autonomous
Management,Maintenance and
Unequipped)
December 2004