Ntp- A285 Monitor Fc_Mr-4 Performance - Cisco ONS 15454 Series Procedure Manual

Chapter 8 Monitor Performance
NTP-A285 Monitor FC_MR-4 Performance
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
are already logged in, continue with
Complete the
Step 2
Complete the
Step 3
Complete the
Step 4
Stop. You have completed this procedure.
NTP-A289 Create or Delete FC_MR-4 RMON Thresholds
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
Step 2.
Step 2 Perform any of the following tasks as needed:
•
•
Stop. You have completed this procedure.
December 2004
This procedure enables you to view node transmit and receive
performance during selected time intervals on an FC_MR-4 card and
port to detect possible performance problems.
None
Before you monitor performance, be sure you have created the
appropriate circuits and provisioned the card according to your
specifications. For more information, see
and VT Tunnels"
As needed
Onsite
Retrieve or higher
"DLP-A60 Log into CTC" task on page 17-66
"DLP-A350 View FC_MR-4 Statistics PM Parameters" task on page
"DLP-A351 View FC_MR-4 Utilization PM Parameters" task on page
"DLP-A352 View FC_MR-4 History PM Parameters" task on page
Use this procedure to create or delete FC_MR-4 RMON thresholds for the
ONS 15454.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-A60 Log into CTC" task on page
DLP-A357 Create FC_MR-4 RMON Alarm Thresholds, page 20-41
DLP-A358 Delete FC_MR-4 RMON Alarm Thresholds, page 20-45
and Chapter 11, "Change Card Settings."
at the node that you want to monitor. If you
Step 2.
17-66. If you are already logged in, continue with
Cisco ONS 15454 Procedure Guide, R5.0
NTP-A285 Monitor FC_MR-4 Performance
Chapter 6, "Create Circuits
20-36.
20-37.
20-38.
8-7