Dlp- A155 Delete A Protection Group - Cisco ONS 15454 Series Procedure Manual

Chapter 18 DLPs A100 to A199
DLP-A155 Delete a Protection Group
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Protection tabs.
Step 1
In the Protection Groups area, click the protection group you want to delete.
Step 2
Click Delete.
Step 3
Click Yes in the Delete Protection Group dialog box. Confirm that the changes appear; if they do not,
Step 4
repeat Steps
Return to your originating procedure (NTP).
Step 5
DLP-A156 Delete a Section DCC Termination
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Click the Provisioning > Comm Channel > SDCC tabs.
Step 1
Click the SDCC termination to be deleted and click Delete. The Delete SDCC Termination dialog box
Step 2
appears.
Click Yes in the confirmation dialog box. Confirm that the changes appear; if not, repeat the task.
Step 3
Return to your originating procedure (NTP).
Step 4
March 2007
This task deletes a 1:1, 1:N, 1+1, or Y-cable protection group.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher
1 through 3.
This task deletes a SONET Section data communications channel (SDCC)
termination on the ONS 15454.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher
DLP-A155 Delete a Protection Group
Cisco ONS 15454 Procedure Guide, R5.0
18-23