Ntp- A68 Delete Cleared Alarms From Display - Cisco ONS 15454 Series Procedure Manual

Chapter 7 Manage Alarms
Complete the
Step 5
needed.
Complete the
Step 6
Complete the
Stop. You have completed this procedure.
NTP-A68 Delete Cleared Alarms from Display
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step
To delete cleared node-level alarms:
Step 2
a.
b.
This action removes any cleared ONS 15454 alarms from the Alarms tab. The rows of cleared alarms
turn white and have a C in their status (ST) column.
To delete cleared card-level alarms:
Step 3
a.
b.
Step 4 To delete cleared network-level alarms:
a.
b.
December 2004
"DLP-A112 Display Alarms and Conditions Using Time Zone" task on page 18-3
"DLP-A113 Synchronize Alarms" task on page 18-3
"DLP-A114 View Conditions" task on page 18-4
Use this procedure to delete Cleared (C) status alarms from the alarms
window or transient messages from the CTC History window.
None
As needed
Onsite or remote
Retrieve or higher
"DLP-A60 Log into CTC" task on page
2.
In the node view, click the Alarms tab.
Click Delete Cleared Alarms, referring to the following rules:
– If the Autodelete Cleared Alarms check box is checked, an alarm disappears from the window
when it is cleared.
– If the Autodelete Cleared Alarms check box is not checked, an alarm remains in the window
when it is cleared. The alarm appears white in the window and has a Clear (C) severity. The
alarm can be removed by clicking the Delete Cleared Alarms button.
In the node view, double-click the card graphic for the card you want to open.
Click the Alarms tab and then click Delete Cleared Alarms, referring to the note in
Step 2.
In the node view click View > Go to Network View.
Click the Alarms tab and then click Delete Cleared Alarms, referring to the note in
Step 2.
NTP-A68 Delete Cleared Alarms from Display
as needed.
as needed.
17-66. If you are already logged in, continue with
Cisco ONS 15454 Procedure Guide, R5.0
as
7-3