Table 18-14 Sonet Threshold Options For Ds3-12E And Ds3N-12E Cards - Cisco ONS 15454 Series Procedure Manual

DLP-A167 Change Line and Threshold Settings for the DS3-12E or DS3N-12E Cards
Table 18-13
Parameter
AIS
UAS
Table 18-14
Table 18-14
Parameter
Port
CV
ES
FC
SES
UAS
Note
Return to your originating procedure (NTP).
Step 7
Cisco ONS 15454 Procedure Guide, R5.0
18-40
Electrical Path Options for the DS3-12E and DS3N-12E Cards (continued)
Description
Alarm indication signal
Unavailable seconds
describes the values on the Provisioning > SONET Thresholds tabs for the DS3E cards.
SONET Threshold Options for DS3-12E and DS3N-12E Cards
Description
(Display only.) DS-3 ports partitioned for
STS
Coding violations
Errored seconds
Failure count
Severely errored seconds
Unavailable seconds
The threshold value appears after the circuit is created.
Chapter 18
Options
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click
Show Thresholds (DS3 Pbit: Near End only; DS3
CPbit: Near and Far End).
Numeric. Can be set for 15-minute or one-day
intervals. Select the bullet and click
Show Thresholds (DS3 Pbit: Near End only; DS3
CPbit: Near and Far End).
Options
Line 1, STS 1, Line 2, STS 1
Line 3, STS 1, Line 4 STS 1
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds (Near and Far
End, STS termination only).
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Show Thresholds (Near and Far
End, STS termination only).
DLPs A100 to A199
March 2007