Dlp- A339 Delete A Node From The Current Session Or Login Group - Cisco ONS 15454 Series Procedure Manual

DLP-A339 Delete a Node from the Current Session or Login Group
h.
i.
In the Cisco Transport Controller Installation Wizard, click Next. The online user manuals install.
Step 13
Step 14 Click Finish.
Step 15 Return to your originating procedure (NTP).
DLP-A339 Delete a Node from the Current Session or Login Group
Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the View menu, choose Go to Network View.
Step 1
Click the node that you want to delete.
Step 2
From the CTC File menu, click Delete Selected Node.
Step 3
After a few seconds, the node disappears from the network view map.
Return to your originating procedure (NTP).
Step 4
Cisco ONS 15454 Procedure Guide, R5.0
20-30
Setting this JRE version as the default for these browsers might cause problems with these
Note
browsers.
Click Next.
Click Finish.
If you are uninstalling the JRE, click Remove.
Note
Be sure to record the names of the directories that you choose for JRE and the online user
Note
manuals.
This task removes a node from the current CTC session or login node
group. To remove a node from a login node group that is not the current
one, see the
Group" task on page
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher
"DLP-A372 Delete a Node from a Specified Login Node
20-56.
Chapter 20 DLPs A300 to A399
March 2005