Figure 17-4 Removing The Ons 15454 Front Door; Dlp- A10 Remove The Lower Backplane Cover - Cisco ONS 15454 Series Procedure Manual

DLP-A10 Remove the Lower Backplane Cover
b.
Lift the door from its hinges at the top left corner of the door
Step 2
Figure 17-4
Assembly hinge pin
Return to your originating procedure (NTP).
Step 3
DLP-A10 Remove the Lower Backplane Cover
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Unscrew the five retaining screws that hold the cover in place.
Step 1
Cisco ONS 15454 Procedure Guide, R5.0
17-10
To detach the other end of the ground strap from the longer screw on the fiber guide, loosen the
#4 Kepnut (49-0337-01) on the terminal lug using the open-end wrench. Remove the terminal lug
and lock washer.
Removing the ONS 15454 Front Door
Translucent
circles
for LED
viewing
Door hinge
Assembly hinge
This task removes the lower backplane cover.
#2 Phillips screwdriver
Medium slot-head screwdriver
Small slot-head screwdriver
Required
Onsite
None
(Figure
F A N
F A IL
C R
IT
M A
J
M IN
Chapter 17 DLPs A1 to A99
17-4).
March 2005