Ntp- A291 Replace The Plastic Lower Backplane Cover - Cisco ONS 15454 Series Procedure Manual

Chapter 15 Maintain the Node
NTP-A291 Replace the Plastic Lower Backplane Cover
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Use the Phillips screwdriver to unscrew the five retaining screws that hold the metal cover in place.
Step 1
Grasp the metal cover on each side.
Step 2
Gently pull the metal cover away from the backplane.
Step 3
Place the plastic cover against the shelf assembly and align the screw holes on the cover and the shelf
Step 4
assembly
December 2004
This procedure replaces the plastic cover located at the bottom rear of
the ONS 15454.
Phillips screwdriver
None
As needed
Onsite
None
(Figure 15-11).
NTP-A291 Replace the Plastic Lower Backplane Cover
Cisco ONS 15454 Procedure Guide, R5.0
15-31