Figure 17-27 Login Node Group - Cisco ONS 15454 Series Procedure Manual

NTP-A23 Log into the ONS 15454 GUI
NTP-A23 Log into the ONS 15454 GUI
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Note
As needed, complete the
Step 2
allow you to manage nodes that are not connected to the login node through data communication
channels.
As needed, complete the
Step 3
page
As needed, complete the
Step 4
page
As needed, complete the
Step 5
page
As needed, complete the
Step 6
on page
Stop. You have completed this procedure.
Cisco ONS 15454 Procedure Guide, R5.0
3-6
This procedure logs into CTC, the graphical user interface software used to
manage the ONS 15454. This procedure includes optional node login tasks.
None
NTP-A260 Set Up Computer for CTC, page 3-1
One of the following procedures:
•
•
•
As needed
Onsite or remote
Retrieve or higher
"DLP-A60 Log into CTC" task on page
For information about navigating in CTC, see
"DLP-A61 Create Login Node Groups" task on page
"DLP-A62 Add a Node to the Current Session or Login Group" task on
17-70.
"DLP-A339 Delete a Node from the Current Session or Login Group" task on
20-30.
"DLP-A372 Delete a Node from a Specified Login Node Group" task on
20-56.
"DLP-A327 Configure the CTC Alerts Dialog Box for Automatic Popup" task
20-16.
NTP-A234 Set Up CTC Computer for Local Craft Connection to the
ONS 15454, page 3-2
NTP-A235 Set Up a CTC Computer for a Corporate LAN Connection
to the ONS 15454, page 3-4
NTP-A236 Set Up a Remote Access Connection to the ONS 15454,
page 3-5
17-66.
Appendix A, "CTC Information and Shortcuts."
Chapter 3 Connect the PC and Log into the GUI
17-69. Login node groups
December 2004