Ntp- A166 Export Network Element Defaults - Cisco ONS 15454 Series Procedure Manual

NTP-A166 Export Network Element Defaults
NTP-A166 Export Network Element Defaults
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
The defaults currently displayed are exported whether or not they have been applied to the current node.
Note
The NE defaults can also be exported from the File > Export menu. These exported defaults are for
Note
reference only and cannot be imported.
Complete the
Step 1
defaults.
Click the Provisioning > Defaults Editor tabs.
Step 2
Step 3 Click Export.
Step 4 Click Browse and browse to the location where you want to export the file if it does not appear in the
Export Defaults to File dialog box.
Step 5 Change the file name to something easy to remember (the file name has no extension).
Click OK.
Step 6
Stop. You have completed this procedure.
Cisco ONS 15454 Procedure Guide, R5.0
15-38
This procedure exports the NE defaults using the NE Defaults Editor. The
exported defaults can be imported to other nodes.
None
As needed
Onsite or remote
Superuser
"DLP-A60 Log into CTC" task on page 17-66
Chapter 15 Maintain the Node
at the node where you want to export NE
December 2004