Ntp- A203 Modify Or Delete Card Protection Settings - Cisco ONS 15454 Series Procedure Manual

NTP-A203 Modify or Delete Card Protection Settings
NTP-A203 Modify or Delete Card Protection Settings
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Modifying and deleting protection groups can be service affecting.
Caution
Complete the
Step 1
Step 2.
Complete the
Step 2
Perform any of the following tasks as needed:
Step 3
•
•
•
•
•
Complete the
Step 4
Stop. You have completed this procedure.
NTP-A292 Modify or Delete Communications Channel
Terminations and Provisionable Patchcords
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15454 Procedure Guide, R5.0
10-4
This procedure modifies and deletes card protection settings.
None
NTP-A170 Create Protection Groups, page 4-10
As needed
Onsite or remote
Provisioning or higher
"DLP-A60 Log into CTC" task on page
"NTP-A108 Back Up the Database" procedure on page
DLP-A150 Modify a 1:1 Protection Group, page 18-20
DLP-A152 Modify a 1:N Protection Group, page 18-21
DLP-A154 Modify a 1+1 Protection Group, page 18-22
DLP-A35 Modify an Optimized 1+1 Protection Group, page 17-41
DLP-A155 Delete a Protection Group, page 18-23
"NTP-A108 Back Up the Database" procedure on page
This procedure changes or deletes SDCC and LDCC terminations and
deletes provisionable patchcords on the ONS 15454.
None
DLP-A377 Provision Section DCC Terminations, page 20-61
DLP-A378 Provision Line DCC Terminations, page 20-62
or
DLP-A367 Create a Provisionable Patchcord, page 20-51
As needed
Onsite or remote
Provisioning or higher
Chapter 10
17-66. If you are already logged in, continue with
15-4.
15-4.
Change Node Settings
or
or
December 2004