Dlp- A62 Add A Node To The Current Session Or Login Group - Cisco ONS 15454 Series Procedure Manual

DLP-A62 Add a Node to the Current Session or Login Group
Figure 17-27
192.168.106.143
Node 2
Return to your originating procedure (NTP).
Step 6
DLP-A62 Add a Node to the Current Session or Login Group
Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the CTC File menu, click Add Node.
Step 1
In the Add Node dialog box, enter the node name (or IP address).
Step 2
Note
If you want to add the node to the current login group, check Add to current login node group.
Step 3
Otherwise, leave it unchecked.
Cisco ONS 15454 Procedure Guide, R5.0
17-70
Login Node Group
Laptop PC
IP Address
192.168.106.100
Node 1
IP Address
192.168.105.119
Three node ring
Node 3
This task adds a node to the current CTC session or login node group.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher
If the ONS 15454 that you want to add has TCC2P cards installed and the TCC2P secure mode
option is enabled, enter the backplane LAN port IP address.
LAN/WAN (Ethernet)
Node 4
IP Address
192.168.104.109
Single
Chapter 17
Node 5
IP Address
Two node ring
Node 6
IP Address
192.168.103.199
DLPs A1 to A99
March 2005