Cisco ONS 15454 Series Procedure Manual page 409

Hide thumbs Also See for ONS 15454 Series:

Table of Contents

Power Down the Node

In node view, right-click an installed card and click Delete.

After you have deleted the card, open the card ejectors and remove it from the node.

Shut off the power from the power supply that feeds the node.

Disconnect the node from its external fuse source.

Store all the cards you removed and update inventory records according to local site practice.

Stop. You have completed this procedure.

December 2004

for each installed card.

You cannot delete an Advanced Timing, Communications, and Control (TCC2) card in

Cisco Transport Controller (CTC). Physically remove it after all the other cards have been

deleted and removed.

NTP-A114 Power Down the Node

Cisco ONS 15454 Procedure Guide, R5.0

Chapters

Table of Contents