Cisco ONS 15454 Series Procedure Manual page 108

Hide thumbs Also See for ONS 15454 Series:
Table of Contents

Advertisement

NTP-A234 Set Up CTC Computer for Local Craft Connection to the ONS 15454
If your computer does not have an appropriate browser installed, complete the following:
Step 1
If your computer is a Windows PC, complete the
Step 2
Windows" task on page
If your computer is a UNIX workstation, complete the
Step 3
UNIX" task on page
When your PC or workstation is set up, continue with the setup procedure appropriate to your network:
Step 4
Cisco recommends that you configure your browser to disable the caching of user IDs/passwords on
Note
computers used to access Cisco optical equipment.
In Internet Explorer, choose Tools > Internet Options > Content. Click Auto Complete and uncheck
the User names and passwords on forms option.
In Netscape 7.0, choose Edit > Preferences > Privacy & Security > Forms and uncheck the option to
save form data. For passwords, choose Edit > Preferences > Privacy & Security > Passwords and
uncheck the option to remember passwords. Note that passwords can be stored in an encrypted format.
Netscape versions earlier than 6.0 do not cache user IDs and passwords.
Stop. You have completed this procedure.
NTP-A234 Set Up CTC Computer for Local Craft Connection to the
ONS 15454
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15454 Procedure Guide, R5.0
3-2
To install Netscape 7.x, download the browser at the following site:
http://channels.netscape.com/ns/browsers/default.jsp
To install Internet Explorer 6.x on a PC, download the browser at the following site:
http://www.microsoft.com
20-24, then go to
20-27.
NTP-A234 Set Up CTC Computer for Local Craft Connection to the ONS 15454, page 3-2
NTP-A235 Set Up a CTC Computer for a Corporate LAN Connection to the ONS 15454, page 3-4
NTP-A236 Set Up a Remote Access Connection to the ONS 15454, page 3-5
This procedure explains how to set up a PC running Windows or a Solaris
workstation for an onsite local craft connection to the ONS 15454.
Network interface card (NIC), also referred to as an Ethernet card
Straight-through (CAT 5) LAN cable
NTP-A260 Set Up Computer for CTC, page 3-1
As needed
Onsite or remote
None
Chapter 3
"DLP-A337 Run the CTC Installation Wizard for
Step
4.
"DLP-A338 Run the CTC Installation Wizard for
Connect the PC and Log into the GUI
December 2004

Advertisement

Table of Contents
loading

Table of Contents