Dlp- A369 Provision An Oc-N Circuit Route - Cisco ONS 15454 Series Procedure Manual

Chapter 20 DLPs A300 to A399
In node view, click the Provisioning > Comm Channels > Provisionable Patchcords tabs. If you are
Step 1
in network view, click Provisioning > Provisionable Patchcords tabs.
Click the provisionable patchcord that you want to delete.
Step 2
Click Delete.
Step 3
In the confirmation dialog box, click Yes.
Step 4
Step 5 Return to your originating procedure (NTP).
DLP-A369 Provision an OC-N Circuit Route
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In the Circuit Creation wizard in the Route Review/Edit area, click the source node icon if it is not
already selected.
Step 2 Starting with a span on the source node, click the arrow of the span you want the circuit to travel. To
reverse the direction of the arrow, click the arrow twice.
The arrow turns white. In the Selected Span area, the From and To fields provide span information. The
source STS appears.
March 2005
This task provisions the circuit route for manually routed OC-N circuits.
None
DLP-A60 Log into CTC, page 17-66
The Circuit Creation wizard must be open to complete this task.
As needed
Onsite or remote
Provisioning or higher
Figure 20-9 shows an example of a manually routed circuit.
DLP-A369 Provision an OC-N Circuit Route
Cisco ONS 15454 Procedure Guide, R5.0
20-53