Dlp- A440 Change Enhanced Fc/Ficon Port Settings For The Fc_Mr-4 Card - Cisco ONS 15454 Series Procedure Manual

Chapter 21 DLPs A400 to A499
Table 21-4
Parameter
Autoadjust
GFP Buffer
Threshold
GFP Buffers
Available
Click Apply.
Step 4
Return to your originating procedure (NTP).
Step 5
DLP-A440 Change Enhanced FC/FICON Port Settings for the FC_MR-4 Card
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the FC_MR-4 card where you want to change the port settings.
Step 1
Click the Provisioning > Port > Enhanced FC/FICON tabs.
Step 2
Modify any of the settings described in
Step 3
Table 21-5
Parameter
Port
March 2005
FC_MR-4 Card Distance Extension Port Settings (continued)
Description
If checked, guarantees the best utilization of the
SONET/SDH transport in terms of bandwidth and latency.
Sets the GFP buffer depth. GFP Buffers Available is
editable if Autoadjust GFP Buffer Threshold is unchecked.
For shorter SONET transport distances, Cisco recommends
lower values to decrease latency. For longer SONET
transport distances, Cisco recommends higher values to
provide higher bandwidth.
This task changes the enhanced FC/FICON parameters for FC_MR-4
ports.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher
FC_MR-4 Card Distance Extension Port Settings
Description
(Display only.) The card port number.
DLP-A440 Change Enhanced FC/FICON Port Settings for the FC_MR-4 Card
Table 21-5.
Cisco ONS 15454 Procedure Guide, R5.0
Options
—
Numeric. 16 through
1200, multiples of 16
only
Options
1 through 4
21-19