Chapter 7 Manage Alarm - Cisco ONS 15454 Series Procedure Manual

NTP-A195 Document Card, Node, and Network Provisioning
10.
NTP-A195 Document Card, Node, and Network Provisioning
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As needed
Onsite/Remote
Security Level
Complete
Step 1
data. If you are already logged in, continue with
As needed, complete the
Step 2
Step 3 As needed, complete the
Stop. You have completed this procedure.
NTP-A196 View Alarms, History, Events, and Conditions
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Step 1 Log into the node that contains the alarms you want to view. Refer to the
on page 17-66
Step 2 Complete the
Step 3 Complete the
Complete the
Step 4
on page 18-1
Cisco ONS 15454 Procedure Guide, R5.0
7-2
NTP-A258 Provision External Alarms and Controls on the Alarm Interface Controller-International,
page 7-11—Complete this procedure as needed to provision external alarms and controls on the
Alarm Interface Controller-International (AIC-I) card.
Use this procedure to print card, node, or network CTC information in
graphical or tabular form on a Windows-provisioned printer. This
procedure is useful for network record keeping and troubleshooting.
A printer connected to the CTC computer by a direct or network
connection
Chapter 4, "Turn Up Node"
As needed
Onsite or remote
Retrieve or higher
"DLP-A60 Log into CTC" task on page 17-66
"DLP-A515 Print CTC Data" task on page
"DLP-A516 Export CTC Data" task on page
Use this procedure to view current or historical alarms and conditions for
a card, node, or network. This information is useful for monitoring and
troubleshooting hardware and software events.
None
As needed
Onsite or remote
Provisioning
for instructions. If you are already logged in, continue with
"DLP-A390 View Alarms" task on page 20-85
"DLP-A517 View Alarm or Event History" task on page 22-8
"DLP-A111 Changing the Maximum Number of Session Entries for Alarm History" task
as needed.
at the node where you want to record or save
Step 2.
22-5.
22-6.
"DLP-A60 Log into CTC" task
as needed.
Chapter 7 Manage Alarms
Step 2.
as needed.
December 2004