Dlp- A351 View Fc_Mr-4 Utilization Pm Parameters - Cisco ONS 15454 Series Procedure Manual

Chapter 20 DLPs A300 to A399
Figure 20-6
Card View
Performance
Statistics tab
Click Refresh. Performance monitoring statistics for each port on the card appear.
Step 3
View the PM parameter names appear in the Param column. The current PM parameter values appear in
Step 4
the Port # columns. For PM parameter definitions, refer to the "Performance Monitoring" chapter in the
Cisco ONS 15454 Troubleshooting Guide.
Return to your originating procedure (NTP).
Step 5
DLP-A351 View FC_MR-4 Utilization PM Parameters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the FC_MR-4 card where you want to view PM counts. The card view
Step 1
appears.
Click the Performance > Utilization tabs
Step 2
March 2005
FC_MR-4 Statistics on the Card View Performance Window
tab
Refresh
button
This task enables you to view line utilization PM counts on an FC_MR-4
card and port to detect possible performance problems.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Retrieve or higher
DLP-A351 View FC_MR-4 Utilization PM Parameters
Auto-refresh
drop-down list
(Figure 20-7).
Cisco ONS 15454 Procedure Guide, R5.0
Baseline Clear Help
button button button
20-37