Dlp- A142 Modify A Static Route - Cisco ONS 15454 Series Procedure Manual

Chapter 18 DLPs A100 to A199
DLP-A142 Modify a Static Route
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Network tabs.
Step 1
Click the Static Routing tab.
Step 2
Click the static route you want to edit.
Step 3
Click Edit.
Step 4
In the Edit Selected Static Route dialog box, enter the following:
Step 5
•
•
•
See the
Click OK.
Step 6
Return to your originating procedure (NTP).
Step 7
DLP-A143 Delete a Static Route
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Network > Static Routing tabs.
Step 1
Click the static route you want to delete.
Step 2
Click Delete. A confirmation dialog box appears.
Step 3
Click Yes.
Step 4
March 2007
This task modifies a static route on an ONS 15454.
None
DLP-A60 Log into CTC, page 17-66
DLP-A65 Create a Static Route, page 17-73
As needed
Onsite or remote
Provisioning or higher
Mask
Next Hop
Cost
"DLP-A65 Create a Static Route" task on page 17-73
This task deletes an existing static route on an ONS 15454.
None
DLP-A60 Log into CTC, page 17-66
DLP-A65 Create a Static Route, page 17-73
As needed
Onsite or remote
Provisioning or higher
DLP-A142 Modify a Static Route
for detailed field descriptions.
Cisco ONS 15454 Procedure Guide, R5.0
18-17