Dlp- A203 Clear A Lock On Or Lock Out - Cisco ONS 15454 Series Procedure Manual

Chapter 19 DLPs A200 to A299
Return to your originating procedure (NTP).
Step 7
DLP-A203 Clear a Lock On or Lock Out
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Maintenance > Protection tabs.
Step 1
In the Protection Groups list, click the protection group that contains the card you want to clear.
Step 2
In the Selected Group list, click the card you want to clear.
Step 3
In the Inhibit Switching area, click Unlock.
Step 4
Click Yes in the confirmation dialog box.
Step 5
The lock-on or lockout is cleared.
Step 6 Return to your originating procedure (NTP).
DLP-A204 Scope and Clean Fiber Connectors and Adapters with Alcohol and
Dry Wipes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
September 2005
This task clears a lock-on or lockout.
None
DLP-A60 Log into CTC, page 17-66
DLP-A201 Apply a Lock On, page 19-1
Out, page 19-2
As needed
Both
Maintenance or higher
This task cleans the fiber connectors and adapters with alcohol and dry
wipes.
Compressed air/duster
Isopropyl alcohol 70 percent or higher
Optical swab
Optical receiver cleaning stick
None
Required
Onsite
None
DLP-A203 Clear a Lock On or Lock Out
or DLP-A202 Apply a Lock
Cisco ONS 15454 Procedure Guide, R5.0
19-3