Ntp- A301 Merge Circuits - Cisco ONS 15454 Series Procedure Manual

NTP-A301 Merge Circuits
In the notification box, view the reconfiguration result. Click Ok.
Step 6
Stop. You have completed this procedure.
NTP-A301 Merge Circuits
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
Click the Circuits tab.
Step 2
Click the circuit that you want to use as the master circuit for a merge.
Step 3
Click Edit.
Step 4
In the Edit Circuits window, click the Merge tab.
Step 5
Choose the circuits that you want to merge with the master circuit.
Step 6
Step 7 Click Merge.
Step 8 In the confirmation dialog box, click Yes to continue.
In the notification box, view the merge result. Click Ok.
Step 9
Stop. You have completed this procedure.
Cisco ONS 15454 Procedure Guide, R5.0
9-10
This procedure merges two circuits that create a single, contiguous path but
are separate circuits because of different circuit IDs or conflicting
parameters. A merge combines a single master circuit with one or more
circuits.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-A60 Log into CTC" task on page
Chapter 9
17-66. If you are already logged in, continue with
Manage Circuits
December 2004