Figure - Cisco ONS 15454 Series Procedure Manual

DLPs A100 to A199
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
Note
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
DLP-A111 Changing the Maximum Number of Session Entries for Alarm
History
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the Edit menu, choose Preferences.
Step 1
The CTC Preferences dialog box appears
March 2007
This task changes the maximum number of session entries included in the
alarm history. Use this task to extend the history list in order to save
information for future reference or troubleshooting.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher

(Figure

18-1).
C H A P T E R
Cisco ONS 15454 Procedure Guide, R5.0
18
18-1