Dlp- A390 View Alarms - Cisco ONS 15454 Series Procedure Manual

Chapter 20 DLPs A300 to A399
Note
Return to your originating procedure (NTP).
Step 7
DLP-A390 View Alarms
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In the card, node, or network view, click the Alarms tab to view the alarms for that card, node, or
Step 1
network
Figure 20-17
Table 20-12
March 2005
The threshold value appears after the circuit is created.
Use this task to view current alarms on a card, node, or network.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Provisioning or higher
(Figure 20-17).
CTC Node View
lists the columns in the Alarms window and their descriptions.
DLP-A390 View Alarms
Cisco ONS 15454 Procedure Guide, R5.0
20-85