Figure 5-7 Traditional Path Protection Dri Fiber Connection Example; Ntp- A216 Provision A Traditional Path Protection Dual-Ring Interconnect - Cisco ONS 15454 Series Procedure Manual

Hide thumbs Also See for ONS 15454 Series:

Table of Contents

Turn Up Network

The interconnect nodes must have fiber connections. An example is shown in

example shows a path protection DRI with two rings, Nodes 1 through 4 and 5 through 8. In the

example, an additional OC-N is installed in Slot 13 at Node 4 and connected to an OC-N in Slot 6

at Node 6. Nodes 3 and 5 are interconnected with OC-N cards in Slot 6 (Node 3) and Slot 13 (Node

Stop. You have completed this procedure.

December 2004

Traditional Path Protection DRI Fiber Connection Example

NTP-A216 Provision a Traditional Path Protection Dual-Ring Interconnect

Cisco ONS 15454 Procedure Guide, R5.0

Chapters

Table of Contents