Cisco ONS 15454 Series Procedure Manual page 557

Chapter 18 DLPs A100 to A199
Table 18-19
Parameter
Service State
AINS Soak
Table 18-20
Table 18-20
SONET
Layer
All
Line (L)
March 2007
Line Options for the EC1-12 Card (continued)
Description
Identifies the autonomously
generated state that gives the
overall condition of the port.
Service states appear in the format:
Primary State-Primary State
Qualifier, Secondary State.
Sets the automatic in-service soak
period.
lists the SONET Threshold options for EC1-12 cards.
SONET Threshold Options for the EC1-12 Card
Parameter Description
Port # (Display only.) EC-1 card
port #
CV Coding violations
ES Errored seconds
SES Severely errored seconds
DLP-A169 Change Line and Threshold Settings for the EC1-12 Card
Options
IS-NR—(In-Service and Normal) The port
•
is fully operational and performing as
provisioned.
OOS-AU,AINS—(Out-Of-Service and
•
Autonomous, Automatic In-Service) The
port is out-of-service, but traffic is carried.
Alarm reporting is suppressed. The ONS
node monitors the ports for an error-free
signal. After an error-free signal is detected,
the port stays in OOS-AU,AINS state for
the duration of the soak period. After the
soak period ends, the port service state
changes to IS-NR.
OOS-MA,DSBLD—(Out-of-Service and
•
Management, Disabled) The port is
out-of-service and unable to carry traffic.
OOS-MA,MT—(Out-of-Service and
•
Management, Maintenance) The port is
out-of-service for maintenance. Alarm
reporting is suppressed, but traffic is carried
and loopbacks are allowed.
Duration of valid input signal, in hh.mm
•
format, after which the card becomes in
service (IS) automatically
0 to 48 hours, 15-minute increments
•
Options
1 to 12
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
Cisco ONS 15454 Procedure Guide, R5.0
18-47