Cisco ONS 15454 Series Procedure Manual page 775

DLPs A500 to A599
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
Note
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
DLP-A507 View OC-N PM Parameters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the OC-N card where you want to view PM counts. The card view appears.
Step 1
Click the Performance tab
Step 2
October 2005
This task enables you to view performance monitoring (PM) counts on
an OC-N card and port to detect possible performance problems.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Retrieve or higher
(Figure 22-1).
C H A P T E R
Cisco ONS 15454 Procedure Guide, R5.0
22
22-1