Dlp- A395 View Bfdl Pm Parameters For The Ds3Xm-12 Card - Cisco ONS 15454 Series Procedure Manual

Chapter 20 DLPs A300 to A399
DLP-A395 View BFDL PM Parameters for the DS3XM-12 Card
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the DS3XM-12 electric card where you want to view PM counts. The card
Step 1
view appears.
Click the Performance > BFDL PM tabs to view the BFDL performance parameters
Step 2
Figure 20-22
BFDL tab
March 2005
This task enables you to view BFDL PM parameters for near-end or
far-end performance during selected time intervals on a DS3XM-12
electrical card and port to detect possible performance problems.
None
Before you monitor performance, be sure you have created the
appropriate circuits and provisioned the card according to your
specifications. For more information, see
and VT Tunnels"
As needed
Onsite or remote
Retrieve or higher
Viewing DS3XM-12 Card BFDL Performance Monitoring Information
Performance tab Card view
Request Signal-type
drop-down list drop-down list
DLP-A395 View BFDL PM Parameters for the DS3XM-12 Card
Chapter 6, "Create Circuits
and Chapter 11, "Change Card Settings."
Sub-signal STS Refresh
drop-down list button
Cisco ONS 15454 Procedure Guide, R5.0
(Figure 20-22).
20-93