Chapter 6
Create Circuits and VT Tunnels
Figure 6-14
To put a G-Series card port in one-port bidirectional transponder mode
Step 5
Click the desired port row (for example, Port 1).
a.
In the TXP Port column, choose the desired port from the drop-down list (for example, Port 1).
b.
In the TXP Mode column, choose TX/RX from the drop-down list.
c.
Click Apply.
d.
In card view, the desired port has arrows and a curved line on the back of the port.
August 2005
Two-Port Bidirectional Transponder Mode
NTP-A241 Provision G-Series Ports for Transponder Mode (Tx Mode)
(Figure
Cisco ONS 15454 Procedure Guide, R5.0
6-15):
6-79