Dlp- A353 Refresh Fc_Mr-4 Pm Counts At A Different Time Interval - Cisco ONS 15454 Series Procedure Manual

Chapter 20 DLPs A300 to A399
Click the Performance > History tabs
Step 2
Figure 20-8
Card View
Performance
History tab
Click Refresh. Performance monitoring statistics for each port on the card appear.
Step 3
View the PM parameter names that appear in the Param column. The PM parameter values appear in the
Step 4
Prev-n columns. For PM parameter definitions, refer to the "Performance Monitoring" chapter in the
Cisco ONS 15454 Troubleshooting Guide.
Return to your originating procedure (NTP).
Step 5
DLP-A353 Refresh FC_MR-4 PM Counts at a Different Time Interval
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, double-click the FC_MR-4 card where you want to view PM counts. The card view
appears.
March 2005
FC_MR-4 History on the Card View Performance Window
tab
Interval
drop-down list
This task changes the window view to display specified PM counts in
time intervals depending on the interval option selected.
None
DLP-A60 Log into CTC, page 17-66
As needed
Onsite or remote
Retrieve or higher
DLP-A353 Refresh FC_MR-4 PM Counts at a Different Time Interval
(Figure 20-8).
Port Refresh
drop-down list button
Cisco ONS 15454 Procedure Guide, R5.0
20-39