Installing The Ons 15305 - Cisco ONS 15305 Quick Installation Manual

• Cleaning equipment
• Caps for optical connectors (LC)
• Labels
• Installation material for mounting the ONS 15305 in the rack
• #1 Phillips screwdriver
• #3 Phillips screwdriver
• Voltmeter
• Power meter (for use with fiber optics only)
• Bit error rate (BER) tester
• CAT-5 cables to interconnect the ONS 15305 and ONS 15454
10

Installing the ONS 15305

To install the ONS 15305, complete the following procedures:
1. Installing the ONS 15305 in a 19-in. (482.6-mm) Rack
2. Installing 48-V Power and Ground to the ONS 15305
3. Installing the ONS 15305 AC 230V Power
4. Installing External Ground to the ONS 15305
5. Installing Service Modules
6. Installing the Ground Connector
7. Installing the ONS 15305 Fiber Cable
8. Connecting the Fiber Cable
9. Installing the ONS 15305 Electrical Cable
10. Connecting the Electrical Cables
Installing the ONS 15305 in a 19-in. (482.6-mm) Rack
The shelf assembly is allocated for installation in a 19-in. (482.6-mm) rack.
Note You can also install the ONS 15305 in a ETSI rack (23.6 in [600-mm]) rack by using extension
brackets to convert it. You need two 1-RU extension brackets for this procedure. The brackets
are ordered separately.
11