Figure 3-5 Node Defaults Delayed Upgrade Settings - Cisco ONS 15454 SDH Configuration Manual

Chapter 3 Initial Configuration
Figure 3-5
In the Defaults Selector field, click NODE and then click software.
Step 2
In the Default Name column, the Node.Software.DefaultDelayedUpgrades row and the
Node.Software.AllowDelayedUpgrades row appear
Change the Default Value of the Node.Software.AllowDelayedUpgrades row to TRUE.
Step 3
Change the Default Value of the Node.Software.DefaultDelayedUpgrades row to TRUE.
Step 4
Click Apply.
Step 5
The NE default is now set to enable Version Up.
Step 6 Begin the standard upgrade procedure for the node. Refer to the release-specific software upgrade
document.
After clicking Activate, the Software Activation dialog box appears.
Select the Delay automatic activation on the Software Activation dialog check box and click OK
Step 7
Step 8 Accept the confirmation prompt to begin the Version Up activation.
Note
Node Defaults Delayed Upgrade Settings
Clearing the Delay automatic activation on the ML cards check box and clicking OK begins
normal activation and upgrades all the cards in the node, including the ML-Series cards.
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
Enabling and Completing Version Up
(Figure 3-5).
3-15