Ntp-H56 Document Existing Provisioning; Ntp-H57 View Alarms, History, Events, And Conditions - Cisco ONS 15310-MA SDH Procedure Manual

Before You Begin

NTP-H56 Document Existing Provisioning

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As needed
Onsite/Remote
Security Level
Step 1 Complete the
want to record or save. If you are already logged in, continue with
Step 2 As needed, complete the
Step 3 As needed, complete the
Stop. You have completed this procedure.

NTP-H57 View Alarms, History, Events, and Conditions

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Log into the node that contains the alarms you want to view. See the
Step 1
page 16-43
Complete the
Step 2
Complete the
Step 3
Complete the
Step 4
page 16-92
Complete the
Step 5
needed.
Complete the
Step 6
Complete the
Step 7
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
8-2
This procedure prints card, node, or network CTC information in
graphical or tabular form on a Windows-provisioned printer. It also
exports card, node, or network information as delineated text files to
other applications. This procedure is useful for network record keeping
and troubleshooting.
Printer connected to the CTC computer by a direct or network connection
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
"DLP-H29 Log into CTC" task on page 16-43
"DLP-H222 Print CTC Data" task on page
"DLP-H223 Export CTC Data" task on page
This procedure views current or historical alarms and conditions for a card,
a node, or network. The information is useful for monitoring and
troubleshooting hardware and software events.
None
As needed
Onsite or remote
Provisioning or higher
for instructions. If you are already logged in, proceed to
"DLP-H72 View Alarms" task on page 16-87
"DLP-H73 View Alarm or Event History" task on page 16-90
"DLP-H74 Change the Maximum Number of Session Entries for Alarm History" task on
as needed.
"DLP-H75 Display Alarms and Conditions Using Time Zone" task on page 16-93
"DLP-H76 Synchronize Alarms" task on page 16-93
"DLP-H77 View Conditions" task on page 16-94
Chapter 8
at the node that has the information you
Step 2.
18-18.
18-20.
"DLP-H29 Log into CTC" task on
Step 2.
as needed.
as needed.
as needed.
as needed.
Manage Alarms
as
78-19416-01