Dlp-H238 Change Optical Port Line Settings - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 18 DLPs H200 to H299

DLP-H238 Change Optical Port Line Settings

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Refer to the "Network Element Defaults" appendix in the Cisco ONS 15310-MA SDH Reference Manual
Note
for ONS 15310-MA SDH port default settings.
In node view, double-click the 15310E-CTX-K9 card.
Step 1
Click the Provisioning > Optical > Line tabs.
Step 2
Note
Modify the settings described in
Step 3
fields, you can choose an option from a drop-down list; in others you can type a value.
Table 18-11
Parameter
Port #
Port Name
78-19416-01
This task changes the line settings for ONS 15310-MA SDH optical ports.
Optical ports for the ONS 15310-MA SDH are located on the
15310E-CTX-K9 card.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
If you want to modify a threshold setting, it might be necessary to click the available directional,
type, and interval (15 Min, 1 Day) radio buttons and then click Refresh. This will display the
desired threshold setting.
Table 18-1
Optical Port Line Settings
Description
(Display only) Port number.
Provides the ability to assign the
specified port a name.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
by clicking in the field that you want to modify. In some
Options
• 1-1 (STM1; STM4;STM16 [MA only])
• 2-1 (STM1; STM4; STM16 [MA only])
User-defined, up to 32 alphanumeric/ special
characters. Blank by default.
See the "DLP-H56 Assign a Name to a Port"
task on page 16-75.
18-43