Ntp-H76 Reconfigure Circuits; Ntp-H77 Merge Circuits - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 6 Manage Circuits

NTP-H76 Reconfigure Circuits

Purpose
Tools/Equipment
Prerequisite Procedures Circuits must exist on the network. See
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
Click the Circuits tab.
Step 2
Choose the circuits that you want to reconfigure.
Step 3
From the Tools menu, choose Circuits > Reconfigure Circuits.
Step 4
In the confirmation dialog box, click Yes to continue.
Step 5
In the notification box, view the reconfiguration result. Click Ok.
Step 6
Stop. You have completed this procedure.

NTP-H77 Merge Circuits

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
Click the Circuits tab.
Step 2
Click the circuit that you want to use as the master circuit for a merge.
Step 3
Click Edit.
Step 4
In the Edit Circuits window, click the Merge tab.
Step 5
78-19416-01
This procedure rebuilds circuits, which may be necessary when a large
number of circuits are in the PARTIAL status.
None
Low-order Path Tunnels."
As needed
Onsite or remote
Provisioning or higher
"DLP-H29 Log into CTC" task on page
This procedure merges two circuits that create a single, contiguous path but
are separate circuits because of different circuit IDs or conflicting
parameters. A merge combines a single master circuit with one or more
circuits.
Circuits must exist on the network. See
Low-order Path Tunnels."
As needed
Onsite or remote
Provisioning or higher
"DLP-H29 Log into CTC" task on page
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
Chapter 5, "Create Circuits and VC
for circuit creation procedures.
16-43. If you are already logged in, continue with
Chapter 5, "Create Circuits and VC
for circuit creation procedures.
16-43. If you are already logged in, continue with
Before You Begin
6-11