Dlp-H229 Consolidate Links In Network View - Cisco ONS 15310-MA SDH Procedure Manual

•
•
•
Click Next.
Step 6
In the Circuit Destination area, complete the following:
Step 7
•
•
•
Click Finish.
Step 8
Return to your originating procedure (NTP).
Step 9

DLP-H229 Consolidate Links in Network View

Purpose
Tools/Equipment
Prerequisite procedures
Required/As needed
Onsite/Remote
Security Level
Global consolidation persists when CTC is re-launched but local consolidation does not.
Note
From the View menu, choose Go to Network View. CTC shows the link icons by default.
Step 1
Perform the following steps as needed:
Step 2
•
•
•
•
•
•
•
Right-click the network map and choose Show Link Icons to toggle the link icons on and off.
Step 3
To consolidate all the links on the network map (global consolidation):
Step 4
a.
b.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-28
Node—Choose the source node.
Slot—Choose the source slot.
Port—If displayed, choose the source port.
Node—Choose the destination node.
Slot—Choose the destination slot.
Port—If displayed, choose the destination port.
This task consolidates data communications channel (DCC), GCC, optical
transport section (OTS), provisionable patchcord (PPC), and server trail
links in the CTC network view.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
To toggle between link icons, go to
To consolidate all the links on the network map, go to
To consolidate a link or links between two nodes, go to
To view information about a consolidated link, go to
To access an individual link within a consolidated link, go to
To expand consolidated links, go to
To filter the links by class, go to
Right-click anywhere on the network map.
Choose Collapse/Expand Links from the shortcut menu. The Collapse/Expand Links dialog
window appears.
Step 3.
Step
Step
Step 6.
Step 8.
Step 9.
Chapter 18 DLPs H200 to H299
4.
5.
Step 7.
78-19416-01