Figure 16-19 Login Node Group - Cisco ONS 15310-MA SDH Procedure Manual

Before You Begin
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
If a Java Plug-in Security Warning dialog box appears during log in, complete the
Public-Key Security Certificate" task on page 16-46
by Software Release 4.1 and later.
During network topology discovery, CTC polls each node in the network to determine which one
contains the most recent version of the CTC software. If CTC discovers a node in the network that has
a more recent version of the CTC software than the version you are currently running, CTC generates a
message stating that a later version of the CTC has been found in the network and offers to install the
CTC software upgrade JAR files. If you have network discovery disabled, CTC will not seek more recent
versions of the software. Unreachable nodes are not included in the upgrade discovery.
Note
As needed, complete the
Step 2
allow you to view and manage nodes that have an IP connection but no data communications channel
(DCC) connection to the login node.
Step 3 As needed, complete the
page 16-47.
Step 4 As needed, complete the
page 16-48.
As needed, complete the
Step 5
page 16-50.
Stop. You have completed this procedure.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
2-6
NTP-H13 Set Up Computer for CTC, page 2-1
One of the following procedures:
NTP-H14 Set Up TL1 session for Local Craft Connection to the Node,
•
page
NTP-H15 Set Up a CTC Computer for a Corporate LAN Connection
•
to the Node, page
NTP-H16 Set Up a Remote Access Connection to the Node, page 2-5
•
Required
Onsite or remote
Retrieve or higher
"DLP-H29 Log into CTC" task on page
Upgrading the CTC software will overwrite your existing software. You must restart CTC after
the upgrade is complete.
"DLP-H31 Create Login Node Groups" task on page
"DLP-H32 Add a Node to the Current Session or Login Group" task on
"DLP-H33 Delete a Node from the Current Session or Login Group" task on
"DLP-H36 Configure the CTC Alerts Dialog for Automatic Popup" task on
Chapter 2
2-3. or
2-4, or
16-43.
to install the public-key security certificate required
Connect the PC and Log into the GUI
"DLP-H30 Install
16-46. Login node groups
78-19416-01